DIY Videos :How to generate Free Power for the rest of your life by building a Micro Hydro Electric Power system and kiss the Grid system goodbye.



RECENT POSTS YOU MIGHT LIKE
  • DIY Video:How to convert an Old Ceiling Fan Motor into a 40W Efficient Alternator Generator
    This video shows an easy conversion of an Old Ceiling Fan motor into a Power producing 40 Watt 200V 3000RPM Alternator Generator that can used for powering your devices.The ceiling fan motors have the stator in the center and the outer portion that usually attaches to the fan blades rotates around the stationary stator. This allows for Neodymium Magnets to be placed around the perimeter. When the outer portion spins, it produces an alternating current. For conversion of an alternating current (AC) input into direct current a (DC) output, a bridge rectifier is used

    Watch the DIY Homemade Ceiling Fan Motor conversion Video

  • DIY Video : How to get Gold from Scrap Computer parts that you can find at the junkyard
    [the_ad id="6432"] These series of videos shows how to easily Refine and Smelt Gold from Computer Memory Chips. In the first video I'm recovering Gold from computer Memory Chips (RAM).The Part 2 video on how to take the gold from computer chips and refine it to a more pure metal and smelt it.In Part 3 video, I'm doing a purity test on the gold I recovered from the computer memory chips.If you follow this process, you will be able to convert all of your old and outdated computer chips into pure gold that you can turn around and sell for money. It’s a great way to salvage your old electronics and get some value out of them.

    Watch the Gold extracting process from Scrap Computer parts

  • DIY Video: How to build a Homemade Gravity fed ,Drip Waste Oil Heater for your Garage . Really Efficient…..Good heat.
    This video shows the build of a gravity fed, drip waste oil burner .This is the one of the simplest design for maximum heat and flexibility .The concept behind this burner is that Oil does not burn, but the fumes it gives off when the oil is boiling.The deeper the pan the harder is it to maintain an efficient boil.A cast iron pan maintains the higher temperature the best and does not threaten to burn through.The secondary holes in the vertical pipe are where the actual burn is occurring.The materials needed for this build are Air compressor tank,Pan that has been burnt for about one and half hour,Oil, like motor oil,Flamer,Chimney pipe (with length of about ten feet).This setup creates a lot of carbon in and around the burning chamber, but does not smoke at all.It will run about 400-500 degree Celsius (at the base) at under or up-to 1L per hour

    Watch the DIY Homemade Drip fed Waste/Engine Oil Burner/heater build Videos