W@rI3R35107

123 POSTS 0 COMMENTS

This 7 Part Video series shows the conversion of a old unused ceiling fan into a power generator.Part One shows the dismantling of the ceiling fan and how to wire it up.Part Two shows how to insert a metal banding used for attaching the magnets around the stator. Part Three shows how to orient/place the magnets inside the ceiling fan housing to achieve a voltage reading.Part Four shows how to mount the face plate and create your own turbine blades. Part Five shows how to build the body to support the turbine.Part Six shows how to mount the turbine unit onto the body as well as partially lighting a CFL bulb with a quick spin.Part Seven is the final part that shows how to wire up the turbine to the diode bridge rectifier and taking it for it’s first flight.

Watch this 7 Part series on building a wind turbine out of an old ceiling fan

This Video shows one of the most efficient wood stove on the planet it will make gasoline run a generator and a propane fridge, heats hot water and your home at the same time.This Stove can burn all paper and plastic trash, cow dung, wood, grass and even dry human waste plus just about every other dry organic compound. The bio-digester manure can be burnt after it produces methane for you and used as Syn-Gas.To construct a perfect wood stove, you have to collect all the important components, with which the device should be built up. You’ll need Barrel,Stovepipe,Driller,Braces,Welding gloves.Generally, it is said that the efficiency of wood may vary from one model to another. However, still, with the above method, you can design the best stove, which can not only operate a generator and fridge but also forms gasoline. If your stove is in hotter condition, it may be easier to break down the fuel into smaller particles at the time of burning.

Watch the homemade DIY Multipurpose Wood Stove build Video

This video shows you How to recycle your Waste motor oil,transmission oil or any waste fuel into 100% Re-Usable Fuel.Instead of throwing away that used motor oil and fuel, you can reuse it. By using a centrifuge, you will be able to extract all of the impurities out from the fuel using centrifugal force. It is more effective that a filter in getting the micro-particles out, and it is completely safe to reuse in your vehicle.

The materials needed for this project are Motor Oil – You will be using the centrifuge to convert used waste motor oil to clean fuel that you can reuse,Centrifuge – This will spin the motor oil and extract the impurities from it.Buckets – You will use the buckets to collect the waste and cleaned motor oil. Generator – The centrifuge will use a lot of power. You are going to need a generator in order to run it. Typically, 220 V will be enough to run the centrifuge.Spatula – You will use the spatula to clean the centrifuge and get all of the leftover gunk out of the cylinder to prepare it for another use.

 

Watch the waste motor oil recycling video

This Video series shows step by step on how to build a Homemade DIY Off grid Solar Powered PowerWall Backup System using salvaged and...
Share