DIY Video:How to build a Simple Homemade Pocket Water Filter. Small, lightweight and powerful.

    This video shows the build of a Simple Homemade “Straw Style” Water Filter that is 99.9% effective at removing many common disease/cancer causing water contaminants.This is good to have when hiking/camping and ideal for in a SHTF/Emergency situation.This is also is excellent for purifying rain (or tap) water.The materials needed for this build are poultry baster, coffee filters, cotton balls (optional) and activated carbon. All items found at dollar store – except the activated carbon .This Water Filter is small, lightweight and powerful.

    Watch the DIY Homemade Straw Style Water Filter Build Video



    RECENT POSTS YOU MIGHT LIKE
    • DIY Video : How to build a 100W Super Bright LED Flashlight using a PVC pipe and Dead Laptop Battery
      This video shows the build of a super bright 100W LED flashlight in PVC pipe housing.Main parts bought from ebay. The battery of this flashlight came from 18650 lithium cells removed from dead laptop batteries.The other materials required for this build are 100W LED COB chip,100W LED Reflector, lens, lens bracket kit,DC to DC boost converter 250W,DC to DC step down (buck) converter.Some parts bought at local electronics or hardware store.Rest all stuff had lying around.The other video shows the build of the 22V 6Ah battery pack from dead laptop batteries.

      Watch the DIY Homemade 100W LED Flashlight using PVC and Laptop Battery Build

    • How to build a Simple Homemade Water Distiller that turns dirty water/salt water into clean fresh pure water
      [the_ad id="6432"] This video shows the build of a "pure water" Water Distiller that easily turns dirty water/salt water etc... into clean fresh pure water. This produces lots of clean water fast. Made from close to 12 feet of copper tubing along with a few fittings (optional stainless steel tube shown as well). video contains full instructions on how to build it. Early testing shows it produces about a quart in 1.5 hrs (and half gallon in 2.5 hrs). note that i soldered on the copper fitting. If you don't have a torch, they sell "push on" fittings that require no soldering. *if soldering, remember to use "lead-free" solder.The process is simple. It boils water and creates steam. The steam rises without bringing any of the impurities along with it. The steam travels through the coils and slowly cools and condenses. It finally condenses back to its liquid form and drips out as clean water.

      Watch the DIY Deluxe Pure Water Distiller build

    • DIY Video : How to heat your Garage by using an Outdoor Wood Burning Boiler and an old car radiator
      This video shows a home-made outdoor wood burning boiler system used to heat a garage.This uses an indoor car radiator and fan and some underground tubing to cycle the water through.The materials you need for this build are a Barrel Stove kit,Pex crimper,Pex tubing,Pex clamps,Windows Fan,Coolant and a Submersible Pump.

      Watch the Garage Heater build Videos