DIY Video:How to build a Simple Homemade Pocket Water Filter. Small, lightweight and powerful.



    RECENT POSTS YOU MIGHT LIKE
    • DIY Video: How to build a Copper Coil Ammo Box Off Grid Water Heater.Also works as a Space Heater
      This Video shows the build of an Ammo Box heater in combination with a copper coil.It circulates heated water from a near by campfire,wood stove or solar heater into itself.This setup serves 2 main functions.It can be used as an off grid water heater ,also can be used as a offgrid space heater.This is used here to heat a camper.The ammo box will radiate the heat inside the camper making it warm even its freezing cold outside.This setup is great way to bring the heat of the fire inside while keeping the fire itself safely outside.

      Watch the Off Grid Copper Coil Ammo Box Water Heater/Space Heater Build Video

    • How to Build a Homemade DIY Thermal Heat Collector for heating your garage for Cheap

      In my mission to be more self sufficient on our urban homestead, I am always in search of ways to take advantage of what God has provided us with, free of charge. Today, that form of hand-out is solar heat.In consideration of heat for my garage, I toyed with several ideas… wood, kerosene, and propane were my first choices, and then I thought maybe I should experiment with solar thermal. I did some research on solar thermal heat and then added my own common sense thinking to come up with this new solar thermal heat collector. My total cost was about $120 bucks and a day and a half worth of work

      Watch the Homemade DIY Solar Thermal Collector  Build Video

    • DIY Video: How to build a Homemade Gravity fed ,Drip Waste Oil Heater for your Garage . Really Efficient…..Good heat.
      This video shows the build of a gravity fed, drip waste oil burner .This is the one of the simplest design for maximum heat and flexibility .The concept behind this burner is that Oil does not burn, but the fumes it gives off when the oil is boiling.The deeper the pan the harder is it to maintain an efficient boil.A cast iron pan maintains the higher temperature the best and does not threaten to burn through.The secondary holes in the vertical pipe are where the actual burn is occurring.The materials needed for this build are Air compressor tank,Pan that has been burnt for about one and half hour,Oil, like motor oil,Flamer,Chimney pipe (with length of about ten feet).This setup creates a lot of carbon in and around the burning chamber, but does not smoke at all.It will run about 400-500 degree Celsius (at the base) at under or up-to 1L per hour

      Watch the DIY Homemade Drip fed Waste/Engine Oil Burner/heater build Videos