DIY Video: How to build your own Alaskan Style Homemade Chainsaw Mill from Steel Scraps

This video shows the build of an Alaskan Style Chainsaw Mill from Junk Steel scraps lying around your garage. Compact, lightweight design bolts directly to the chainsaw’s bar without much drilling required.The materials you need for building this are :Steel Scraps – You will use these to create the frame of the saw.Welder – To cut and weld in the steel frame together.A Square – To ensure that your frame is balanced with 90° angles.Metal Tubing – Will be used to change the elevation of the cut.Chainsaw – This will serve as the saw for the chainsaw mill.

Watch the Homemade Chainsaw Mill Build Video



RECENT POSTS YOU MIGHT LIKE
  • DIY Video : How to build a Thermal Vacuum Water Pump that needs no electricity and has no moving parts!
    This Video shows the build of a Solar Evacuated Thermal Vacuum Water Pump works by harnessing the energy of the sun in the day time and then uses the cold of night to create a vacuum in the system that is used to pump water. This is a working prototype of an idea on how to pump water from stagnant water sources cheaply using no moving part.By using the sun's energy to generate both a pressure and a vacuum cycle we create a very efficient water pump, that has only two simple moving parts. This pump was able to move one gallon every cycle to 8 feet high, by creating artificial day/night cycles the pump could move about 1 gallon every 30 minutes of sunlight, or about 12 to 20 gallons a day.

    Watch the DIY Homemade Thermal Vacuum Water Pump Build Video

  • DIY Video : How to build an Off Grid Water Heater – Hot Water with DIY Firestove
    NEED HOT water? Camping, off grid, this Off Grid Water Heater is the unit to have!.It has given my off grid home comfort and HOT water! VERY simple setup and very economical.Water heating is essential not only for comfort off the grid, but for survival.Hot water is definitely a luxury that you miss when you actually have to go without.In most homes your hot water heater is consuming energy day and night, 24-7. Most hot water heaters are set to keep the water hot at all times, even while you are in bed. This can be quite wasteful. And with the rising energy costs, many people are looking for alternatives,this Off Grid Water Heater can be really helpful.

    Watch the DIY Outdoor Off Grid Water Heater build video

  • DIY Video: How to Recycle Old Used Car Batteries to build a DIY Off Grid Solar PowerWall. Get Off-Grid backup power in case of an emergency
    This Video series shows step by step on how to build a Homemade DIY Off grid Solar Powered PowerWall Backup System using salvaged and used Chevy Car Batteries.Here we are modifying an 18kwh (Gen 2) battery from an Old Chevy Volt EV hybrid, so that I can use the cells in a DIY Powerwall. The original battery is all wired in series for 355 volts. I'm breaking it down into 8 smaller batteries, each with 44 volts.This DIY Powerwall is using Chevy Volt (Gen 2) batteries instead of the usual Tesla or 18650 cells. This set-up will provide me off-grid backup power in case of an emergency.It's great that we can re-use and recycle these used car batteries.

    Watch the conversion of Old Car Battery into a DIY Solar PowerWall Backup System