How to build a Homemade Hybrid Waste Oil and Wood Garage Heater

Update :



RECENT POSTS YOU MIGHT LIKE
  • How to build a Survival Super Shelter from scratch. Complete Bug out Camp Build Instructions
    Being able to build your own make-do shelter out of the resources available in your immediate surroundings is a critical skill in bushcraft and outdoor living.This multi part video series shows the build of a typical lean-to shelter first and then upgraded to a Kochanski super shelter, it gives you a good idea of the structure and how it works.This is a complete Bug out Camp Build Instruction series from start to finish.The materials you'll need to build this shelter are Rope – To secure the frame of your shelter together.Support Poles – These will serve as the skeleton of the shelter and bed frame,Large Tarp – To use as your roof.V-Shaped Branches – These will be used to raise your bed off the ground,Saw and Hatchet – For cutting the wood.

     Watch the DIY Bug Out Super Shelter Build Videos from start to finish

  • DIY Video : How to build an Off Grid DIY 12 Volt Washing Machine from junk parts and pieces laying around
    This video shows the build of a homemade 12V washing machine made from junk parts and pieces laying around.Most of the materials you’ll need can be found around your house and most certainly at your local hardware store.Great for going off grid for a while preparing to be survive in case of SHTF or are you just a regular old camper that needs clean clothes at camp.Laundry has come up a number of times as a self-sufficiency topic. It makes sense for a couple reasons. First of all, because many people in our crowd are wanting to be self-sufficient of the electrical and water grids, and need find another way of washing clothes. Secondly, because we are also usually looking for ways to save money.

    Watch the DIY Off Grid DIY 12V Washing Machine build video

  • DIY Video : How to Turn old unused ceiling fans into a useful energy producer by building a Wind Turbine out of it
    This 7 Part Video series shows the conversion of a old unused ceiling fan into a power generator.Part One shows the dismantling of the ceiling fan and how to wire it up.Part Two shows how to insert a metal banding used for attaching the magnets around the stator. Part Three shows how to orient/place the magnets inside the ceiling fan housing to achieve a voltage reading.Part Four shows how to mount the face plate and create your own turbine blades. Part Five shows how to build the body to support the turbine.Part Six shows how to mount the turbine unit onto the body as well as partially lighting a CFL bulb with a quick spin.Part Seven is the final part that shows how to wire up the turbine to the diode bridge rectifier and taking it for it's first flight.

    Watch this 7 Part series on building a wind turbine out of an old ceiling fan