How to build a Homemade Powerful 12V Water Pump from an Old Cordless Drill



RECENT POSTS YOU MIGHT LIKE
  • How to build a Simple Homemade Water Distiller that turns dirty water/salt water into clean fresh pure water
    [the_ad id="6432"] This video shows the build of a "pure water" Water Distiller that easily turns dirty water/salt water etc... into clean fresh pure water. This produces lots of clean water fast. Made from close to 12 feet of copper tubing along with a few fittings (optional stainless steel tube shown as well). video contains full instructions on how to build it. Early testing shows it produces about a quart in 1.5 hrs (and half gallon in 2.5 hrs). note that i soldered on the copper fitting. If you don't have a torch, they sell "push on" fittings that require no soldering. *if soldering, remember to use "lead-free" solder.The process is simple. It boils water and creates steam. The steam rises without bringing any of the impurities along with it. The steam travels through the coils and slowly cools and condenses. It finally condenses back to its liquid form and drips out as clean water.

    Watch the DIY Deluxe Pure Water Distiller build

  • DIY Video : How to build a Thermal Vacuum Water Pump that needs no electricity and has no moving parts!
    This Video shows the build of a Solar Evacuated Thermal Vacuum Water Pump works by harnessing the energy of the sun in the day time and then uses the cold of night to create a vacuum in the system that is used to pump water. This is a working prototype of an idea on how to pump water from stagnant water sources cheaply using no moving part.By using the sun's energy to generate both a pressure and a vacuum cycle we create a very efficient water pump, that has only two simple moving parts. This pump was able to move one gallon every cycle to 8 feet high, by creating artificial day/night cycles the pump could move about 1 gallon every 30 minutes of sunlight, or about 12 to 20 gallons a day.

    Watch the DIY Homemade Thermal Vacuum Water Pump Build Video

  • How to build a Simple Homemade Bandsaw Mill from Old Car Wheels
    [the_ad id="6432"] This video shows the build of an really inexpensive homemade bandsaw mill out of old car wheels.One of the best things about this design is it’s simplicity of course, but it’s also made from salvaged and repurposed materials, which helps cut the cost of the sawmill down to an affordable level. Not everyone can afford $4000 to $5000 for a brand new portable sawmill. Building your own sawmill not only gives you that sense of satisfaction of doing it yourself, but it saves you money.Bottom line, it’s a tool you’ll use for years to come, and will more than pay for itself the first time you use it. Lumber isn’t cheap, and if you’ve got the natural resources and access to those resources, it makes the most sense to save money, time, and effort by using what you have available

    Watch the DIY Homemade Bandsaw mill from Old Car Wheels Build Video