How to build a Homemade Emergency Water Well Pump that requires no electricity .Get water out of a well anytime, anywhere



RECENT POSTS YOU MIGHT LIKE
  • DIY Video:How to convert an Old Ceiling Fan Motor into a 40W Efficient Alternator Generator
    This video shows an easy conversion of an Old Ceiling Fan motor into a Power producing 40 Watt 200V 3000RPM Alternator Generator that can used for powering your devices.The ceiling fan motors have the stator in the center and the outer portion that usually attaches to the fan blades rotates around the stationary stator. This allows for Neodymium Magnets to be placed around the perimeter. When the outer portion spins, it produces an alternating current. For conversion of an alternating current (AC) input into direct current a (DC) output, a bridge rectifier is used

    Watch the DIY Homemade Ceiling Fan Motor conversion Video

  • DIY Video: How to build a Homemade Hot Water Off grid Air Heater using Heat Exchanger and a Car Radiator Fan
    This video shows the build of a Homemade Hot Water Air Heater using an old heat exchanger and a car radiator fan.This unit provides near-instant warm air.The Air-Flow: it's adjustable from 10 CFM to 1500 CFM. max breeze 20 Mph! The Temps: With input water temps between 120F to 150F the output air temp ranged from 85F to 110F. *or from heat pump temps up to near furnace temps! easily warms a room or two, maybe more.The heart of the unit is an 8x8 Copper/Aluminum Heat Exchanger., This unit can easily be run straight from a 12v solar panel or battery so it's "off-grid" ready. Simply mounted the fan in front of it,then connected the pipes. then you just connect a small water pump (200-350 gph) to one of the pipes and drop both pipes into a water-filled sink,almost immediately it creates very warm air (in under a minute).

    Watch the DIY Homemade Homemade Hot Water Off grid Air Heater Build Video

  • DIY Video:How to build a Cheap Homemade HHO Hydrogen Generator .Great for Cutting,Melting,Welding and Polishing
    This video shows the build of a Homemade HHO Generator and torch for cutting and welding scrap metals .This safe torch makes an ideal tool for welding, brazing, soldering, drilling, cutting, polishing and annealing for metals, ceramics, glass and plastics.The Flame/Fuel Generator internally produces hydrogen and oxygen gasses from the distilled water fuel, utilizing the electrolytic process. The gasses are generated naturally in the two-to-one ratio needed for efficient flame combustion.

    Watch the DIY homemade HHO Hydrogen Generator Build Video