How to build a Multi Use Simple Homemade Wood Gas System from Scrap Materials that can be used as a Generator,Cooking Stove and Lantern



RECENT POSTS YOU MIGHT LIKE
  • DIY Video: How to build a really efficient Portable Ammo Box Wood Stove
    This video shows the build of a really efficient Portable Ammo Box Wood Stove .Great for outdoorsmen, adventurers, preppers, survivalist and anyone looking for a small, portable stove for both heating and cooking. Plus, it's a fun project and makes a great gift for the outdoor enthusiast or hobbyist. The materials needed for this project are 50 Cal Ammo Box,Stove Rope Kit,Propane cylinder,Fiberglass Cloth,Mica Sheet,12" Steel Tent Stakes, 4mm thick steel plate,22 gauge steel sheet,16 gauge, Steel rivets ,BBQ skewer,4 copper pennies,2 small compression springs,3 ½” hose clamp.  

    Watch the Portable Ammo Box Wood Stove Build Series

    Other Articles:
  • How to build a super Efficient Wood Burner from start to finish .No smoke and Clean Burn
    This Video series shows the build of a wood burner/heater from an gas cylinder from start to finish.The video begins by explianing the cutting of flue /ash pan hole in top and bottom. Main materials from the local scrapyard made new.Then door is cut out, door frame built,secondary air pipework,flue deflector plate.The next in the series shows the fitting flue deflector plate,drilling bending and fixing the les,grinding all old welds off, making lifting handles,flue outlet and drilling the secondary air intake hole,making the door hinges,cutting hole out for glass in door,welding secondary air intake pipes in.The series ends with making the secondary air intake,door frame welded,primary air damper built and welded on.A Test burn is shown at the end.

    Watch the build of a Homemade Efficient Wood Burner from scratch

  • DIY Video : How to build a Homemade Mini Hydrogen Generator / Water to fuel Generator from simple Household items
    This video shows you how to build a Mini Hydrogen Generator / Water to fuel Generator using materials that is easily available around your house.This is achieved by Electrolysis which is an electro-chemical process whereby which hydrogen and oxygen are disassociated from water.By means of electrical influence using simple water one can get gas, and gather in into a special container and use this gas (hydrogen) for power supply of engines or other appliances.It is preferred not to use salt as electrolyte it will release chlorine gas.You can use sodium hydroxide, which can be bought as a “drain opener” at lowes or home depot, you could probably use any type of hydroxide though.

    Watch the DIY Homemade Mini Hydrogen Generator Build Video