How to build a really powerful Solar Powered BullDozer that requires no fuel.Step by step Build Instructions

This video series shows the step by step build of an awesome 275 Watt Solar Powered BullDozer from start to finish.The Solar panels are connected to 4 golf cart batteries that powers a 1 and half HP motor,which again are connected to a bunch of gears and sprockets that independently power each of the 4 wheels to get the maximum traction.Even with 10% power,this bulldozer works like a champ.Another feature of this dozer is easy to control manual steering mechanism.The body is build out of Aluminium/Stainless Steel.The cool thing about this bulldozer is that it runs without Gasoline.Yep no gas needed .ever!!

Watch the DIY Homemade Solar Powered BullDozer Build Series



RECENT POSTS YOU MIGHT LIKE
  • DIY Video : How to Generate FREE POWER by building a Homemade Waterwheel Microhydro System from Start to Finish
    This Video Series shows step by step on How you can provide enough electricity for one house by building a Micro Hydro water wheel electric generator .Not only you will no longer dependent on the power grid, but you’ll have electricity when SHTF and more important: absolutely FREE.Unlike solar panels, a water wheel electric generator can produce electricity 24/7.Simply,the flowing, dropping water is spinning a wheel .The wheel shaft it’s connected to a simple coil generator that produces electricity. If you don’t need electricity you may adapt the water wheel to grind grain, to cut wood, strengthen iron or to sharpen tools. Anyway you choose to use it, a water wheel is an important installation when living off the grid or when SHTF.

    Watch the DIY  Waterwheel Micro hydro System Build Videos

  • DIY Video: How to build a Homemade Gravity fed ,Drip Waste Oil Heater for your Garage . Really Efficient…..Good heat.
    This video shows the build of a gravity fed, drip waste oil burner .This is the one of the simplest design for maximum heat and flexibility .The concept behind this burner is that Oil does not burn, but the fumes it gives off when the oil is boiling.The deeper the pan the harder is it to maintain an efficient boil.A cast iron pan maintains the higher temperature the best and does not threaten to burn through.The secondary holes in the vertical pipe are where the actual burn is occurring.The materials needed for this build are Air compressor tank,Pan that has been burnt for about one and half hour,Oil, like motor oil,Flamer,Chimney pipe (with length of about ten feet).This setup creates a lot of carbon in and around the burning chamber, but does not smoke at all.It will run about 400-500 degree Celsius (at the base) at under or up-to 1L per hour

    Watch the DIY Homemade Drip fed Waste/Engine Oil Burner/heater build Videos

  • DIY Video : How to build an Ammo Can Double Burner Rocket Stove from scratch . Step by step Build Video Instructions
    This video shows the step by step build of a Double Burner Rocket Stove made from an Old Ammo Can.The can is around 19″ x 10″ x 10″, I use vermiculite as insulation, some use sand instead but I like vermic as it is fairly light.If you remove some of the insulation and it’ll be a mini barrel stove for heating too.Here i use a Black and Decker Scorpion saw to cut the pipes and just a cheap bi-metal hole saw to do the holes. I’ve cooked a full steak dinner in the woods on it and it worked great.

    Watch the Homemade Ammo Can Double Burner Rocket Stove build