How to dig your own Backyard Water Well using a simple shovel.Step by step Video Instructions.

This 3 part video series shows the build of a 9ft Shallow Water Well using a shovel and other easily available materials .Considering that most disasters can cause serious disruptions in the water supply and the importance of water for survival, putting in a well is a great idea. Of all the possible sources for water, having a well on your own property is the most secure source you can have.Even so, if the grid goes down, that water could be out of your reach, if you don’t take the right precautions.
There’s something that our ancestors all had on their property, which we don’t often have today. No, I’m not referencing a barn, although that would be true. I’m referring to a well.You may be able to augment your home or homestead’s water supply for very little cost by digging a shallow well.

Watch How to dig your own DIY Homemade Water Well using a shovel series



RECENT POSTS YOU MIGHT LIKE
  • How to build a Survival Super Shelter from scratch. Complete Bug out Camp Build Instructions
    Being able to build your own make-do shelter out of the resources available in your immediate surroundings is a critical skill in bushcraft and outdoor living.This multi part video series shows the build of a typical lean-to shelter first and then upgraded to a Kochanski super shelter, it gives you a good idea of the structure and how it works.This is a complete Bug out Camp Build Instruction series from start to finish.The materials you'll need to build this shelter are Rope – To secure the frame of your shelter together.Support Poles – These will serve as the skeleton of the shelter and bed frame,Large Tarp – To use as your roof.V-Shaped Branches – These will be used to raise your bed off the ground,Saw and Hatchet – For cutting the wood.

     Watch the DIY Bug Out Super Shelter Build Videos from start to finish

  • How to build a Simple Homemade Water Distiller.Great for emergency or everyday use.
    This video shows the build of a Deluxe "Stainless Steel" Pure Water Still.This Distills all types of Dirty-water/Salt-water to a clean fresh drinking water.The materials you need for this project are : the 24" stainless steel supply lines are 3/4". the pvc piece is 1 1/4" OD to 3/4" threaded. the coupler is 1 1/4" to 1 1 /4". (adjust these as necessary to your specific kettle)Made using a stainless steel teapot and 6 feet of stainless steel tubing,this can either be used on a standard stove burner or rocket stove/campfire/parabolic dish for total off-grid operation. This assembles/disassembles fast for easy portability.This produces water about 50% faster than my standard stainless steel design

    Watch the DIY Homemade Pure Water Still Build Video

  • DIY Video : How to build a Simple Woodgas generator for small electric RV generator
    This video shows the build of a  Simple Woodgas generator for small electric RV generator.A wood gas generator is able to convert wood, or in our case, wood pellets, into a source of fuel which can be used to generate electricity.The wood or charcoal is turned into wood gas, which will be used for powering our generator. In this tutorial, we are creating a wood gas generator that can be used to power and RV motor.From start to finish, we were able to put together this generator in only four hours. In total, we used less than $100 in parts. It’s a great way to build your own wood gas generator while staying on a tight budget.If done correctly, you should be able to run your generator by burning wood pellets alone. It’s enough to power a small 5 hp electric generator, or even more. .The materials you need for this project are 20 Gallon Metal Trash can - This will be used to contain the wine cooler and wood chips as they burn,Wine Cooler - This will encase the wood chips as they are burning,Metal Bowl - You will place the wood chips in this bowl and collect the coals as they burn.Filter - This will filter the tar out as it makes its way to the generator,Wood Pellets - Our fuel source.Aluminum Duct Line - This will connect to the gas generator to the wood pellet burning stove.Air Inlet Port - A valve that we can use to let air in as the wood gas travels to the generator.

    Watch the woodgas generator build videos