How to generate 24/7 Free Electricity from across a Pond/Creek by building a Ceiling Fan Alternator Hydro System




Build detail :





RECENT POSTS YOU MIGHT LIKE
  • DIY Video : How to build a Thermal Vacuum Water Pump that needs no electricity and has no moving parts!
    This Video shows the build of a Solar Evacuated Thermal Vacuum Water Pump works by harnessing the energy of the sun in the day time and then uses the cold of night to create a vacuum in the system that is used to pump water. This is a working prototype of an idea on how to pump water from stagnant water sources cheaply using no moving part.By using the sun's energy to generate both a pressure and a vacuum cycle we create a very efficient water pump, that has only two simple moving parts. This pump was able to move one gallon every cycle to 8 feet high, by creating artificial day/night cycles the pump could move about 1 gallon every 30 minutes of sunlight, or about 12 to 20 gallons a day.

    Watch the DIY Homemade Thermal Vacuum Water Pump Build Video

  • DIY Video: How to build your own Water Pump From Scrap and save lots of dollars
    This video shows the build of a Water Pump From Scrap .Today I dig into our scrap pile to come up with enough parts to build ourselves a gasoline powered water pump. I first start off with an old gear pump I had laying around, then I salvage an old pressure washer base to mount everything on. To power this water pump I use that two horse engine I bought at a yard sale. build everything out of free find junk that would have gone to landfill or scraped, at least these useful parts can now have a new lease on life.

    Watch the DIY Water Pump From Scrap build video

  • DIY Video: How to build a Homemade Copper Pipe Solar Water Heater and get super hot water fast and free
    This video shows the step by step build of a Homemade "COPPER PIPE" Solar Water Heater with material list.This reaches temps at or above 150F with air temps from high 40's to low 50's.This is a slim portable design (at only 2" thick) and is very rugged and durable (built with 2x2's and 1/2" plywood).This one hooks to a standard water tap/garden hose . Multiple panels can be hooked together for additional capacity and extras can be easily added.Multiple panels can be hooked together for additional capacity and extras can be easily added; water flow valves, temp sensors, timers etc. Make sure to use type L copper. Lastly, to secure the glass into the frame, just use a bead of silicone caulk around the edge and drop the glass in

    Watch the DIY Homemade Copper pipe Solar Thermal Water Heater build Video