DIY Video : How to build a Homemade Solar Powered Copper Coil Ice-Chest Air Cooler

    This video shows the build of a Homemade AC Air Cooler.it’s a combination of the standard ice-chest air cooler and a copper coil fan cooler – all in one,combined to make an ice/cold water air cooler!This one is 100% Solar powered.All you need is ice/cold water and sun and you got “free” cool air.The basic materials needed to make this project are Fan, 2” pvc pipes, copper tubing, 2 15w solar panels, 12v DC pump.The rest of the materials needed are shown at the end of the video.

    Watch the DIY Homemade Copper Coil Ice-Chest Air Cooler Build



    RECENT POSTS YOU MIGHT LIKE
    • DIY Video:How to Build a Homemade Low Flow Ram Pump that can pump water without Electricity from very low flow creeks ,river.
      This video shows you can pump water from a very low creek or water source without any electricity by building a Simple Low Flow intake Ram Pump.This is ideal for any low flow creek,spring with around 30 gal per minute flow rate.This Ram Pump will need a continuous flow of water to operate. Determining the flow rate will help determine the size pump that you need.Measure your gallons per minute by placing a 5 gallon bucket in the water and collect all the water while timing how long it takes to fill the bucket and divide the gallons of water by the time in seconds and then multiply by 60 seconds to get GPM

      Watch the DIY Homemade Low Flow Intake Ram Pump build Video

    • How to generate Free and Emergency hot water for your house by building a Waste Oil powered water heater
      This Video shows the build of a water heater from an old gas hot water service and converted it to run on waste oil instead of gas.The system could easily be set up in an off grid or prepper type location as it only needs a small amount of 12V power to supply the car blower I used here. The burner runs on any waste oil and is gravity fed without the need for Nozzles, pumps or compressors. As well as providing Domestic hot water, the output can also be used in a home heating system which is what I plan to set up for my home this winter.It could also be used for an outdoor shower, to heat water for animal troughs, to heat a spa or small swimming pool or other uses to replace gas or electric how water heating.

      Watch the DIY Homemade Waste Oil powered Water Heater Build

    • DIY Video :How to build your own Homemade Lumber Mill from scratch . Step by step video Instructions
      [the_ad id="6432"] This video series shows the step by step build of a simple Homemade Lumber mill. One of the best things about this design is it’s simplicity of course, but it’s also made from salvaged and re-purposed materials.With your own mill, you can cut local softwoods to frame buildings and you can saw up local hardwood logs for mantles, doors, paneling and other house trim, or to make into furniture.You have to at first make boards, taking the parts from trees. You may do it by using your chainsaw.You can make almost all types of board, by fitting the big devices to the bar of chainsaw.You need to use a pipe, some bolts and steel in order to construct a lumber maker. For making the mill, weld together a rectangular shaped short sized chainsaw bar.

      Watch the DIY Homemade Lumber Mill Build Video Series