How to build a Simple Homemade Wood Burning Clothes Dryer



RECENT POSTS YOU MIGHT LIKE
  • DIY Video :How to build your own Homemade Lumber Mill from scratch . Step by step video Instructions
    [the_ad id="6432"] This video series shows the step by step build of a simple Homemade Lumber mill. One of the best things about this design is it’s simplicity of course, but it’s also made from salvaged and re-purposed materials.With your own mill, you can cut local softwoods to frame buildings and you can saw up local hardwood logs for mantles, doors, paneling and other house trim, or to make into furniture.You have to at first make boards, taking the parts from trees. You may do it by using your chainsaw.You can make almost all types of board, by fitting the big devices to the bar of chainsaw.You need to use a pipe, some bolts and steel in order to construct a lumber maker. For making the mill, weld together a rectangular shaped short sized chainsaw bar.

    Watch the DIY Homemade Lumber Mill Build Video Series

  • DIY Video:How to build a Simple Battery Backup Power Station for Off Grid Living
    This video shows the build of a simple battery backup power station that will provide emergency power when the lights go out.If you're ever faced with living off the grid, a simple system like this could mean the difference between success and failure. Someday you may find yourself in the dark. Having a backup power station could dramatically increase your comfort level .This is a simple setup that is just as easy to get up and running. It’s a great solution for anyone that is interested in having a backup power source the event of a blackout. It’s always better to be prepared for situations like these

    Watch the Homemade emergency Battery Backup Power Station Build

  • DIY Video: How to build an Efficient Cold Water Powered Radiant Air Cooler that uses no electricity. Turns Cold Water into Cold Air!!
    This video shows the build of a simple Homemade Water-Chilled" Radiant Air Cooler! w/motor speed control!.Made with an 8x8 "water-to-air" heat exchanger, small water pump and a 7" fan. This new design cools air by pumping ice-water (or cold water) thru a water-to-air heat exchanger (copper/aluminum radiator) and then drawing the warm air thru the unit using a 12v radiator fan. the air that is produced is cooled dramatically with no increase in humidity and no need to vent any part of the unit to the outside. the heat is essentially captured into the cold water and the "cold" in the water is released into the room as cold air.

    Watch the DIY Homemade Offgrid Radiant Air Cooler Build Video