DIY Video: How to build your own Water Pump From Scrap and save lots of dollars



    RECENT POSTS YOU MIGHT LIKE
    • DIY Video : How to build a Thermal Vacuum Water Pump that needs no electricity and has no moving parts!
      This Video shows the build of a Solar Evacuated Thermal Vacuum Water Pump works by harnessing the energy of the sun in the day time and then uses the cold of night to create a vacuum in the system that is used to pump water. This is a working prototype of an idea on how to pump water from stagnant water sources cheaply using no moving part.By using the sun's energy to generate both a pressure and a vacuum cycle we create a very efficient water pump, that has only two simple moving parts. This pump was able to move one gallon every cycle to 8 feet high, by creating artificial day/night cycles the pump could move about 1 gallon every 30 minutes of sunlight, or about 12 to 20 gallons a day.

      Watch the DIY Homemade Thermal Vacuum Water Pump Build Video

    • DIY Video: How to build a Band Sawmill from scratch in your backyard and save a lot of money. Step by step build instructions.
      This video series shows the step by step build of a homemade Band Sawmill from scratch in your backyard.Harvesting and processing the wood that grows on your property is the dream of many homesteaders. The dream can be expensive (around $5k) because you need a sawmill in order to rip the wood and remove the bark.Instead of spending years saving up, you can spend less by building your own saw mill.it’s a tool you’ll use for years to come, and will more than pay for itself the first time you use it. Lumber isn’t cheap, and if you’ve got the natural resources and access to those resources, it makes the most sense to save money, time, and effort by using what you have available.

      Watch the DIY step by step build of the Band Sawmill series

    • DIY Video:How to build an Easy to make,light,Strong Chainsaw Mill from start to finish.
      Harvesting and processing the wood that grows on your property is the dream of many homesteaders. The dream can be expensive (around $5k) because you need a sawmill in order to rip the wood and remove the bark.Instead of spending years saving up, you can spend less by building your own saw mill out of a chainsaw!.This video shows the build of an easy to make,light and strong Chainsaw mill from scratch.You will need some 2mm,3mm square pipes, coarse threads,bolts,spring washers

      Watch the DIY Homemade Simple Chainsaw Mill Build