DIY Video : How to dig your own Water Well from start to finish and save a lot of money






Pump Tune up:

Sandpoint Well Fix for Restoring well performance.

Homemade ‘Clam Shell’ Well Digging Tool

Building a Passive Sand Trap From Scrap



RECENT POSTS YOU MIGHT LIKE
  • DIY Video : How to build a Thermal Vacuum Water Pump that needs no electricity and has no moving parts!
    This Video shows the build of a Solar Evacuated Thermal Vacuum Water Pump works by harnessing the energy of the sun in the day time and then uses the cold of night to create a vacuum in the system that is used to pump water. This is a working prototype of an idea on how to pump water from stagnant water sources cheaply using no moving part.By using the sun's energy to generate both a pressure and a vacuum cycle we create a very efficient water pump, that has only two simple moving parts. This pump was able to move one gallon every cycle to 8 feet high, by creating artificial day/night cycles the pump could move about 1 gallon every 30 minutes of sunlight, or about 12 to 20 gallons a day.

    Watch the DIY Homemade Thermal Vacuum Water Pump Build Video

  • How to Build a Homemade DIY Thermal Heat Collector for heating your garage for Cheap

    In my mission to be more self sufficient on our urban homestead, I am always in search of ways to take advantage of what God has provided us with, free of charge. Today, that form of hand-out is solar heat.In consideration of heat for my garage, I toyed with several ideas… wood, kerosene, and propane were my first choices, and then I thought maybe I should experiment with solar thermal. I did some research on solar thermal heat and then added my own common sense thinking to come up with this new solar thermal heat collector. My total cost was about $120 bucks and a day and a half worth of work

    Watch the Homemade DIY Solar Thermal Collector  Build Video

  • DIY Video : How to heat your garage the Inexpensive way by building an Outdoor Stove with Heat Exchanger
    This video shows you how to make a 55 gallon Barrel Stove with Heater Exchanger to heat your garage .This one uses a 30 gallon drum which goes inside the 55 gallon drum and the 55 gallon drum is used as a heat exchanger.The heat exchanger assists heat transfer to the room, largely determining how much wood is used. Heat exchangers increase heat transfer to the room by making sure that the hot flue gases leaving through the chimney are as cool as possible. The pipe goes into the garage through a 4 inch hole .

    Watch the DIY Homemade Barrel Stove Heater Exchanger for your garage Videos