How to heat your Space or Room by building a simple and super-efficient Rocket Stove Space Heater

This video series shows the build of a simple and efficient Rocket Stove Space Heater to heat a room or space.Rocket stoves burn at much higher temperatures than your standard wood-stove or fireplace and, as a result, emit much cleaner exhaust. You can burn just about anything in a rocket stove too, from straw to dried dung to small bundles of twigs. This flexibility, combined with the stove’s efficiency, has made them a popular choice.This heater gives off amazing heat, its potential is by far underused.

Watch the DIY Homemade  Rocket Stove Space Heater Build Videos



RECENT POSTS YOU MIGHT LIKE
  • DIY Video : How to build a Thermal Vacuum Water Pump that needs no electricity and has no moving parts!
    This Video shows the build of a Solar Evacuated Thermal Vacuum Water Pump works by harnessing the energy of the sun in the day time and then uses the cold of night to create a vacuum in the system that is used to pump water. This is a working prototype of an idea on how to pump water from stagnant water sources cheaply using no moving part.By using the sun's energy to generate both a pressure and a vacuum cycle we create a very efficient water pump, that has only two simple moving parts. This pump was able to move one gallon every cycle to 8 feet high, by creating artificial day/night cycles the pump could move about 1 gallon every 30 minutes of sunlight, or about 12 to 20 gallons a day.

    Watch the DIY Homemade Thermal Vacuum Water Pump Build Video

  • How to build a Simple Homemade Bandsaw Mill from Old Car Wheels
    [the_ad id="6432"] This video shows the build of an really inexpensive homemade bandsaw mill out of old car wheels.One of the best things about this design is it’s simplicity of course, but it’s also made from salvaged and repurposed materials, which helps cut the cost of the sawmill down to an affordable level. Not everyone can afford $4000 to $5000 for a brand new portable sawmill. Building your own sawmill not only gives you that sense of satisfaction of doing it yourself, but it saves you money.Bottom line, it’s a tool you’ll use for years to come, and will more than pay for itself the first time you use it. Lumber isn’t cheap, and if you’ve got the natural resources and access to those resources, it makes the most sense to save money, time, and effort by using what you have available

    Watch the DIY Homemade Bandsaw mill from Old Car Wheels Build Video

  • DIY Video:How to Build a Homemade Low Flow Ram Pump that can pump water without Electricity from very low flow creeks ,river.
    This video shows you can pump water from a very low creek or water source without any electricity by building a Simple Low Flow intake Ram Pump.This is ideal for any low flow creek,spring with around 30 gal per minute flow rate.This Ram Pump will need a continuous flow of water to operate. Determining the flow rate will help determine the size pump that you need.Measure your gallons per minute by placing a 5 gallon bucket in the water and collect all the water while timing how long it takes to fill the bucket and divide the gallons of water by the time in seconds and then multiply by 60 seconds to get GPM

    Watch the DIY Homemade Low Flow Intake Ram Pump build Video