How to heat your Space or Room by building a simple and super-efficient Rocket Stove Space Heater

Intro :


Build details :

Installation:



RECENT POSTS YOU MIGHT LIKE
  • How to build a Simple Homemade AC Air Cooler using an Old Juice Carton
    This video shows the build of a Simple Homemade Air Cooler using a Used Tropicana half gallon Juice carton.This desktop sized unit works very well and couldn't be simpler to makeThis is made using made a "half gallon" (specifically 59oz./1.75L) juice carton, 80mm DC fan (blue-lit), 1.5" PVC pipe coupler and a 3/8" square wooden dowel.It holds about 2 ice-cube trays worth of ice at a time (and it has a built-in drain! so as ice melts you can drain the ice-water into a glass for a cold drink). Thisonly took me 10 minutes to make it. cost about $8.50.This can be run using a 12v solar panel (2.4 watt or higher), a 12v battery or wall current (just use an ac to dc transformer that puts out 12vdc).

    Watch the Homemade Juice Carton Cheap Air Cooler Video

  • How to make a Survival Rope Making Machine at home from easily available materials
    One of the most important pieces of survival gear to have is rope, and it is definitely something you should have in your Bug Out Bag for wilderness survival.This video series shows the build of a Simple Rope Making Machine at home using materials that you can get at your local hardware store.There is no such thing as prepping for survival without having rope and cordage in your stash.You can use them for fishing lines, bowstrings, trap triggers, snares, lashings, and many other things.And do you know what items would be the first to become unavailable in a crisis? There are a few, and cordage and rope will be among them.

    Watch the DIY Video series on making homemade rope machine at home

  • DIY Video : How to build an Awesome WaterJet Cutter at Home for Dirt Cheap .Build The Ultimate Cutting Tool
    This video shows the build of a $100K worth WaterJet Cutter for about $200 using a cheap pressure washer.Waterjet is the ultimate machine tool, no matter the application.This is because its a Cold Cutting Process which means no heat or stress is imparted into your cut materials.Also you can take the part directly off of the cutting table, no secondary finishing required.Also it eliminates slag deformation and dross waste – unfortunate effects found in plasma and laser cutting processes.

    Watch the DIY Homemade Cheap  WaterJet Cutter Build Video