How to make a Survival Rope Making Machine at home from easily available materials





RECENT POSTS YOU MIGHT LIKE
  • How to build a Homemade Hydronic Heating System that can lower your power bill, save heating cost, and could easily be powered in an emergency situation
    This video shows the build of a Home heating system that heat via hydronic (heat produced with water).This hot water heating system us typically installed at the baseboard or, at the very least, a point low to the ground. Since heat naturally rises, placing the heating element at the lowest point in a room is an easy way to evenly heat the air in a space.The hot water in the system is obtained from a boiler in a utility room, and this boiler is heated by gas, oil, or electricity. The hot water is pumped through a system of pipes that are installed in the baseboard. The heat from this hot water is transferred to the room, and once the heat transfer has cooled the water down again, it's piped back to the boiler room, replaced by a fresh influx of hot water, and reheated.

    Watch the DIY Homemade Hydronic Heating System Build Video

  • How to build a Homemade Clothes Washer that require no electricity.Also works as a Composter
    This video shows the build of a simple off grid washer machine which can also act as a composter.If you thought the only way to wash clothing off grid was to take them down to the creek and beat them against a rock, think again.All you need in order to build this washer is a plastic barrel, some pipes, and – you guessed it – a wooden frame. The frame is meant to support the barrel and keep it from rolling away. You’re going to use the pipes to attach the barrel to the frame, as well as to create the lever that helps you wash the clothes.

    Watch the DIY Offgrid Clothes Washer /Composter Build Video

  • DIY Video:How to build a Homemade Super Efficient Portable Solar Generator.Really Flexible…
    This video series shows the build of a DIY 110 amp hour portable generator is designed to be powered by a 100W solar panel and 2 55AH AGM sealed batteries. The system includes a 30A PWM solar charge controller and a 400W pure sine wave inverter. 12V, 12V USB, and 110V AC outlets offer flexibility for powering/charging a variety of appliances. The system is also set up to be trickle charged via a SAE 2-pin port that allows for a convenient connection to an AC float charger.Total cost of all materials required to build this proj.ect, including all components of the generator and the solar panel, was approximately $950 USD.The parts lists and the wiring schematic is included at the end of the series

    Watch the DIY Homemade 100W /100 Amp hour Portable Solar generator build