DIY Video: How to build a Homemade Copper Pipe Solar Water Heater and get super hot water fast and free



    RECENT POSTS YOU MIGHT LIKE
    • How to build a Homemade Micro Wind Turbine for under $50 that can be mounted anywhere
      [the_ad id="6432"] In this Video tutorial, we are going to show you how you can build your own homemade wind turbine for under $50.The wind turbine is a nice addition to your solar generator system for times when it’s cloudy and you are not receiving as much sunlight as you normally do.A wind turbine is a perfect backup source energy when your solar is not doing a job. The materials you will need for this project are Permanent Magnet Hobby Motor – The spinning turbine will generate electricity with this motor,Charge Controller - The turbine wires will connect to the charge controller,PVC Pipe - Used for the wings and the stand for the turbine,Wire - To transfer the energy to your batteries.,Drill - Drill holes for the screws,Screws - Secure the wings to the hub.,Sandpaper - Sand the PVC wings so they capture the wind more efficiently,A Sheet of Tin – For the YAW system.

      Watch the DIY Micro Wind Turbine for under $50 Build Video

    • How to build a Homemade 79CC Motorized Bug Out Vehicle from start to finish ……Step by step Video Instructions
      [the_ad id="6432"] This Seven Part Video series step by step shows the build of a Homemade Gas Powered 79CC 3 Gear Motorized Bike using a roadmaster bicycle.The engine used here is 79CC harbor Frieght 4 Stroke Engine.The first part shows the components needed for the entire build.The second Video shows how I finish the jack shaft going to the rear wheel on my bike.The third Video shows a small test ride with the bike and also shows how to set up 2nd and 3rd gear as well as throttle and some other things.The 4th vid shows how i put the gas tank on the motorized bike.The rest of the videos shows the miscellaneous changes made to the rough build ,doing some little things here and there.The last Video shows a sample test ride

      Watch the DIY Homemade 79CC 3 Gear Motorized Bug Out Vehicle Build series

    • DIY Video: How to build a Homemade Copper Pipe Solar Water Heater and get super hot water fast and free
      This video shows the step by step build of a Homemade "COPPER PIPE" Solar Water Heater with material list.This reaches temps at or above 150F with air temps from high 40's to low 50's.This is a slim portable design (at only 2" thick) and is very rugged and durable (built with 2x2's and 1/2" plywood).This one hooks to a standard water tap/garden hose . Multiple panels can be hooked together for additional capacity and extras can be easily added.Multiple panels can be hooked together for additional capacity and extras can be easily added; water flow valves, temp sensors, timers etc. Make sure to use type L copper. Lastly, to secure the glass into the frame, just use a bead of silicone caulk around the edge and drop the glass in

      Watch the DIY Homemade Copper pipe Solar Thermal Water Heater build Video