Updated Improved build :
- DIY Video : How to recycle your Waste motor oil,transmission oil or any waste fuel into 100% Re-Usable FuelThis video shows you How to recycle your Waste motor oil,transmission oil or any waste fuel into 100% Re-Usable Fuel.Instead of throwing away that used motor oil and fuel, you can reuse it. By using a centrifuge, you will be able to extract all of the impurities out from the fuel using centrifugal force. It is more effective that a filter in getting the micro-particles out, and it is completely safe to reuse in your vehicle. The materials needed for this project are Motor Oil - You will be using the centrifuge to convert used waste motor oil to clean fuel that you can reuse,Centrifuge - This will spin the motor oil and extract the impurities from it.Buckets - You will use the buckets to collect the waste and cleaned motor oil. Generator - The centrifuge will use a lot of power. You are going to need a generator in order to run it. Typically, 220 V will be enough to run the centrifuge.Spatula - You will use the spatula to clean the centrifuge and get all of the leftover gunk out of the cylinder to prepare it for another use.
- How to build an awesome Drill Powered Winch .Lift a Car or other Heavy loads effortlessly using a simple Cordless DrillThis video shows how a simple Cordless Drill can effortlessly lift or move heavy loads. Definitely beats a Come Along.The winch in the video was purchased from Harbor Freight.With a snatch block this will lift 4000lbs which will pull a 20,000lb vehicle up a 10% grade.A snatch block is a really neat thing. By taking the cable out of the winch and through the pulley of the snatch block, then back to the winch it doubles the pull capacity. It also halves the speed of the item being pulled/lifted but it is a worthwhile trade off. You can keep adding pulleys and running back and forth to reduce the strain on the winch.You will see that a cordless drill lifting a car off the ground is pretty damn impressive
- DIY Video : How to Dig a Shallow Well from Scratch.Step by step Video Instructions