DIY Video : How to build a Simple Homemade Heat Exchanger for heating your house .No Electricity required and Inexpensive…..



    RECENT POSTS YOU MIGHT LIKE
    • How to process your own Firewood by building a Cheap log spiltter made out of Scrap materials
      This 3 part Video series shows the build of a hydraulic log splitter for cheap, by salvaging parts you can build a DIY splitter that will help with processing your firewood.  the Total cost was about $400 to build.I had the 6.5 hp motor from another project, I salvaged all of the metal , some of the scrap came from my work.We used our CNC plasma torch on this project and It made quick work cutting out all of the parts, But one could always free hand cut all the parts fairly easily with a torch.

      Watch the Homemade  Cheap log spiltter Build Series

    • DIY Video : How to get Gold from Scrap Computer parts that you can find at the junkyard
      [the_ad id="6432"] These series of videos shows how to easily Refine and Smelt Gold from Computer Memory Chips. In the first video I'm recovering Gold from computer Memory Chips (RAM).The Part 2 video on how to take the gold from computer chips and refine it to a more pure metal and smelt it.In Part 3 video, I'm doing a purity test on the gold I recovered from the computer memory chips.If you follow this process, you will be able to convert all of your old and outdated computer chips into pure gold that you can turn around and sell for money. It’s a great way to salvage your old electronics and get some value out of them.

      Watch the Gold extracting process from Scrap Computer parts

    • How to run a Homemade Generator on Wood or even Trash/Garbage
      This video series shows how you can run a generator on wood or even trash.When wood is heated it releases a few different types of gases, I use a homemade gasifier to extract these gases out of the wood, I first run the gas through a condenser coil to condense any steam and tar out of the gas, I then use a bubble filter to catch that water and tar and it also helps in filtering out some of the unwanted smoke, next the gas runs through a homemade filter to remove the last of the unwanted byproducts, The wood gas then runs directly into the air intake on the 25cc engine.

      Watch the DIY Homemade Wood Gasifier Build Video