DIY Video : How to build a Homemade Multi Use Water Purifier that uses no electricity .Works as Water heater and stove burner too….

    This video shows the build of a Homemade Water Purifier is extremely effective and super easy to make.The “2 Stage” design purifies almost all water sources to 99.999%. This Starts to produce clean/clear (super hot) water within 20 seconds! uses no electricity.By the end, you should be left with clean water that is completely safe to drink.Great to have in a SHTF/Emergency situation or for everyday use.This setup also doubles as a water heater and stove burner .You can cook on top of the coil at the same time the water is heating.

    Watch the Homemade Multi Use Water Purifier Build



    RECENT POSTS YOU MIGHT LIKE
    • DIY Video:How To Turn Your Old Fan Into An Airconditioner AC for cheap.
      If you are looking for an inexpensive way to beat the heat this summer, there are plenty of very effective DIY options you can try.One of option is to turn an old fan into a Airconditioner AC .The materials you need for the build are 15 foot roll of 1/4" Copper tube,(2) 3/8" clear vinyl tubing cut to length needed,(2) hose clamps that fit the outer diameter of the vinyl tubing.A bag of short zip ties or cable ties (get a bag of 100 they don't cost much).Even before our society arrives at a complete meltdown, summer cooling bills can easily leave you with little money for daily needs and prepping

      Watch the DIY Homemade Fan converted Air Conditioner AC build video

       
    • How to build a Simple Homemade Water Distiller that turns dirty water/salt water into clean fresh pure water
      [the_ad id="6432"] This video shows the build of a "pure water" Water Distiller that easily turns dirty water/salt water etc... into clean fresh pure water. This produces lots of clean water fast. Made from close to 12 feet of copper tubing along with a few fittings (optional stainless steel tube shown as well). video contains full instructions on how to build it. Early testing shows it produces about a quart in 1.5 hrs (and half gallon in 2.5 hrs). note that i soldered on the copper fitting. If you don't have a torch, they sell "push on" fittings that require no soldering. *if soldering, remember to use "lead-free" solder.The process is simple. It boils water and creates steam. The steam rises without bringing any of the impurities along with it. The steam travels through the coils and slowly cools and condenses. It finally condenses back to its liquid form and drips out as clean water.

      Watch the DIY Deluxe Pure Water Distiller build

    • How to heat your Space or Room by building a simple and super-efficient Rocket Stove Space Heater
      This video series shows the build of a simple and efficient Rocket Stove Space Heater to heat a room or space.Rocket stoves burn at much higher temperatures than your standard wood-stove or fireplace and, as a result, emit much cleaner exhaust. You can burn just about anything in a rocket stove too, from straw to dried dung to small bundles of twigs. This flexibility, combined with the stove's efficiency, has made them a popular choice.This heater gives off amazing heat, its potential is by far underused.

      Watch the DIY Homemade  Rocket Stove Space Heater Build Videos