Home Blog Page 7

How to build a Simple Homemade Water Distiller.Great for emergency or everyday use.

0

This video shows the build of a Deluxe “Stainless Steel” Pure Water Still.This Distills all types of Dirty-water/Salt-water to a clean fresh drinking water.The materials you need for this project are : the 24″ stainless steel supply lines are 3/4″. the pvc piece is 1 1/4″ OD to 3/4″ threaded. the coupler is 1 1/4″ to 1 1 /4″. (adjust these as necessary to your specific kettle)Made using a stainless steel teapot and 6 feet of stainless steel tubing,this can either be used on a standard stove burner or rocket stove/campfire/parabolic dish for total off-grid operation.

This assembles/disassembles fast for easy portability.This produces water about 50% faster than my standard stainless steel design

Watch the DIY Homemade Pure Water Still Build Video

How to make a Survival Rope Making Machine at home from easily available materials

0


One of the most important pieces of survival gear to have is rope, and it is definitely something you should have in your Bug Out Bag for wilderness survival.This video series shows the build of a Simple Rope Making Machine at home using materials that you can get at your local hardware store.There is no such thing as prepping for survival without having rope and cordage in your stash.You can use them for fishing lines, bowstrings, trap triggers, snares, lashings, and many other things.And do you know what items would be the first to become unavailable in a crisis? There are a few, and cordage and rope will be among them.

Watch the DIY Video series on making homemade rope machine at home

How to build a Powerful Solar Powered Homemade Air Conditioner. Blows cool air for hours.

0


This video shows the build of a Homemade Powerful ice-based air cooler that can hold large ice-blocks (up to 50lbs) and blows cool air for hours.This can be powered by 12v solar panel, 12v battery or wall current (w/ 12v ac/dc transformer).This is made using a plastic tote, 2 lighted 80mm 12v computer case fans (blue-lit/but choose your color) and 3 pvc couplers (1.5″ threaded).Tote is from walmart, fans from fry’s electronics/amazon and pvc couplers from home depot/lowes.

When fully loaded w/ice it significantly cools an area of 8×10 to 10×10 for several hours.The fans can be easily removed/or exchanged, (any 80mm fan works so you can run different colored ones, unlighted ones, ones of different speeds etc…anytime you want)

 Watch the Homemade DIY Air Conditioner Build Video

How to build a Simple Homemade AC Air Cooler using an Old Juice Carton

0

This video shows the build of a Simple Homemade Air Cooler using a Used Tropicana half gallon Juice carton.This desktop sized unit works very well and couldn’t be simpler to makeThis is made using made a “half gallon” (specifically 59oz./1.75L) juice carton, 80mm DC fan (blue-lit), 1.5″ PVC pipe coupler and a 3/8″ square wooden dowel.It holds about 2 ice-cube trays worth of ice at a time (and it has a built-in drain! so as ice melts you can drain the ice-water into a glass for a cold drink).

Thisonly took me 10 minutes to make it. cost about $8.50.This can be run using a 12v solar panel (2.4 watt or higher), a 12v battery or wall current (just use an ac to dc transformer that puts out 12vdc).

Watch the Homemade Juice Carton Cheap Air Cooler Video

How to build a Simple Survival Water Distiller using Bottles

0

This video shows the build of a Simple Solar Water Distillation System for survival/SHTF situations.This is made using 2 clear (plastic or glass) bottles and glue (or tape).Fill one bottle with dirty/or saltwater,then connect the second bottle and set in the sun.Within a few minutes the water begins to evaporate and the other bottle collects the clean distilled water vapor.make sure the bottles have an airtight connection. prop up bottles at a slight angle so as the dirty/or saltwater starts to evaporate – the max. amount of water vapor will travel up to the higher collection container. works best in bright sun.

Watch the DIY homemade Survival Water Distiller Build

How to build a Homemade DIY Rocket Stove Boiler to heat your Home.Fully offgrid, cheap and really efficient

0

[the_ad id=”6432″]

This video shows the step by step complete build of a Hydronic Home heating system by using a DIY Rocket Stove Water Heater.This stove is smokeless and is hooked up to hydronic floors and making hot water 120-127°f output (approx 40°f temp boost @ 4gal/min).The boiler transfers the heat through water tubes in the heat exchanger. The heated water on the other side of the heat exchanger is then delivered to base boards, radiators or in-floor heating tubes throughout your home.The main benefits of this system is that Heat is evenly distributed in a room: no drafts or hot and cold spots as with forced air and hot water from the boiler can also be directed to an indirect water heater to supply your home with hot water

Watch the DIY homemade DIY Rocket Stove Boiler Build

How to build a Homemade Double Barrel Garage Heater out of Old Water Tanks .Efficient,clean burn and cheap!

0

[the_ad id=”6432″]
]Having some extra heat in your work place is great, specially if you have some left over wood to burn.These videos shows the build of a Homemade Double Barrel Heater for your garage.He we use two Old Electric Water Heater tanks.The tank on the top acts as secondary Heat exchanger unit.The basic components required for this build are Two barrels,Legs or supports,Jigsaw,Driller,Pipe screws.This is really an affordable alternative for economical heat in your shop during the winter time.Great way to repurpose Old Water tanks sitting out there and make a really useful Barrel Heater out of it

Watch the DIY Double Barrel  Stove for your garage build

DIY Video: How to build a Homemade Copper Pipe Solar Water Heater and get super hot water fast and free

0

[the_ad id=”6432″]
This video shows the step by step build of a Homemade “COPPER PIPE” Solar Water Heater with material list.This reaches temps at or above 150F with air temps from high 40’s to low 50’s.This is a slim portable design (at only 2″ thick) and is very rugged and durable (built with 2×2’s and 1/2″ plywood).This one hooks to a standard water tap/garden hose . Multiple panels can be hooked together for additional capacity and extras can be easily added.Multiple panels can be hooked together for additional capacity and extras can be easily added; water flow valves, temp sensors, timers etc. Make sure to use type L copper. Lastly, to secure the glass into the frame, just use a bead of silicone caulk around the edge and drop the glass in

Watch the DIY Homemade Copper pipe Solar Thermal Water Heater build Video

How to build a Simple Homemade Wind Generator from Old Ceiling Fan ,Microwave Oven Parts ,Old TV Antenna and other free junk

0

[the_ad id=”6432″]
This video shows you how to build a DIY Wind Generator using Old Ceiling Fan parts ,Microwave Oven Parts ,Old TV Antenna and other free junk that is laying around. Small wind turbines are electric generators that use the energy of the wind to produce clean, emissions-free power for individual homes.Everyone can generate their own power and cut their energy bills while helping to protect the environment. Unlike utility-scale turbines, small turbines can be suitable for use on properties as small as one acre of land in most areas of the country.Small-scale renewable energy is a must for a sustainable home.Using only a ceiling fan, a microwave oven, and a few other spare parts, you will be able to make your very own homemade wind generator

Watch the DIY Homemade Wind Generator built from Old Ceiling Fan

How to build a Homemade DIY Waste Oil Tree Stump Burner . Easy and cheapest way to remove Tree Stumps

0

[the_ad id=”6432″]
Let’s say you’ve chopped down a tree on your property and cleaned up all of the pieces except for that unsightly stump. Instead of trying methods that will either break your wallet or potentially break your back, you could also try removing the stump by burning it.This video series shows 2 different setups of a Waste Oil powered Tree Stump Burner.This burner is made of a broken washing machine, a bucket, an electric radiator fan, a bucket of used tranny fluid, and the handyman’s secret weapon, duct tape.The second design uses a Vacuum Cleaner blower ,waste oil vaporization unit and a gear pump.

Watch the DIY Homemade Waste Oil Tree Stump Burner Build